USD
Repair guide : Complete Display Assembly iPad Pro 12,9" (2015)
The iPad Pro offers many possibilities, so much as leisure is concerned as well as for professionals. So if you're taking it with you everywhere, its screen is probably damages. The screen is broken ? The touch screen is defective ? You've decided to take matter into your own hands ? You're on the right tracks !
Experts at SOSav have analysed this iPad Pro to offer you a complete repair tutorial which comes with pictures and comments to help you along the steps. You'll then be able to replace the screen of your iPad
yourself !Symptoms :
- Broken screen
- Touch screen issue
- Cracked screen
- Defective pixel
- Display issue
Screens - iPad Pro
Recommended repair kit
Required spare parts
Step 1
Before disassembling the complete display assembly of your iPad Pro, you have to turn it off for safety reasons.
Press for a few seconds the power button and slide to power off.
Step 2
With a hair dryer, heat the edges of the iPad Pro for 2 to 3 minutes.
Careful to only heat the edges, not the screen. Otherwise you'll damage the LCD.
Step 3
Insert the pick on the right side between the frame and the screen.
Do not use force, if it won't come off, do not hesitate to heat the edges up again.
Step 4
Put the picks between the frame and the screen.
This enables to keep the screen lifter while removing the rest of it.
Do the same at the top of the screen.
Step 5
Heat up the left part and continue removing the screen.
Put the picks between the screen and frame to keep it opened.
Step 6
Use the hair dryer again and heat up the bottom part of the iPad.
Use the nylon spduger and gently remove the screen.
There are 2 antennes glued as shown in red on the second picture.
The home button cable is very close to the edge, careful not to damage it.
Step 7
Start by lifting the screen at the top.
Step 8
Put your hands on each side of the screen and lift it from the bottom to the top.
Do not remove it just yet, it is still attached to two cables.
Step 9
Use the cruciform screwdriver and remove the 3 screws circled in red.
Then with a pair of metal tweezers, remove the screen connectors cables bracket.
Step 10
Use the nylon spudger to remove the first connector.
Step 11
Do the same step on the second connector right next to it.
Step 12
The complete display assembly of your iPad Pro is now disassembled.
In case of a broken screen or a touch screen issue, you can replace it by a new one.
To reassemble your iPad Pro 12,9" (2015) follow this guide in reverse order.
Recommended repair kit
Required spare parts
Comments
Add a comment
They're talking about us
trees planted, thanks to you!
All rights reserved to SOSav