Is your Xperia 10 screen broken? Has nothing been displayed since this fall? The touch screen no longer responds and you can no longer navigate through your applications? Without the screen, you cannot use your mobile. And SOSav has understood this through all our years of experience. We know that, like all smartphones, the Xperia 10 screen is the most sensitive to accidents in life since it covers the entire front. And yet, this is the main element for using your mobile. But if you are here, it is because you have chosen smartphone repair rather than changing your mobile for a simple broken screen, and you are right!
The experts at SOSav explain how to change this Xperia 10 screen yourself through the illustrated and detailed steps of this repair guide . All gestures are carefully dissected to support you throughout your Xperia repair. You will learn that the operation is not that difficult by simply taking the time to look into the matter. Our technicians prove that changing your Xperia 10 screen is possible without technical knowledge, following the advice of our technical team.
Why change my Xperia 10 screen myself? To make a real saving compared to the intervention of a professional repairer! And yes, no labor to pay since it is you who take care of everything. And a saving compared to the purchase of a new model. Repairing rather than throwing away is also an ecological gesture since you limit your CO2 impact. Why change mobile when it is repairable? By choosing the Xperia 10 repair, you avoid the trap of planned obsolescence.
But remember to make a full backup of your data before changing the Xperia 10 screen. Precaution valid for all smartphone repairs elsewhere.
Before disassembling your Xperia 10 screen, it is necessary to turn off the smartphone for obvious security reasons.
To do this, press the On / Off button on the right side for a few seconds.
Then not validate "Switch off".
Unclip and remove the plastic cover of the SIM drawer using the nylon spatula.
This cover is located on the left edge of the phone.
You will see that the SIM drawer is attached to this cover.
The SIM drawer is extracted.
Keep the spatula in hand to remove the SD drawer located next to the SIM drawer.
The SD drawer is extracted in turn.
To open the phone, heat the front of the device for several seconds to soften the adhesive that sticks the screen to the chassis.
Heat enough to soften the glue.
Once the screen has warmed up, insert the tip of the nylon spudger into the lower left corner between the frame and the screen to create a small opening.
Take it gently to not scratch the chassis or the screen.
Then insert a pick in the opening and slide it all around the device to gradually take off the screen.
Attention, if you feel that it resists, it will be necessary to heat more to soften the glue. Do not force at the risk of breaking the screen.
Now that the screen is off, you can gently lift it up and place it on the right side of the device.
Attention, the screen is still connected to the phone by its connection cable. Be very careful not to cut it.
To separate the screen from the phone, you will need to remove this Phillips screw circled in red.
This screw retains a metal cover that protects the connectors of the screen and the battery.
Once the screw is removed, you can remove the metal plate.
Now use the nylon spudger to disconnect the battery first.
Then you can disconnect the connection cable from the screen.
There you go ! The screen of your Sony Xperia 10 is removed. You can install your new screen.
To reassemble your Xperia 10 follow this guide in reverse order.
Add a comment