Spare parts for smartphones, tablets... English USD

Repair guide : Home button iPhone 8

Level : Medium Time : 30 min Author : Alexandre
675 people have done this repair successfully ! Why not you?
This guide is for replacing the home button on the iPhone 8.

Problems :

  • Broken home button
Some advice before you start
Repair - Repair guide: Home button iPhone 8

Recommended repair kit

Required spare parts

Guide format : Pdf Integrate

Step 1

Before disassembling the home button on the iPhone 8, you have to turn it off.

Press the power button on the right side of the phone for a few seconds.

Then slide to the right to power off.

Step 2

With a pentalobe screwdriver in the standard tool kit, remove the two screws at the bottom of the iPhone.

Those screws are located on each side of the dock connector.

They secure the bottom part of the iPhone 8 frame.

With the hair dryer, heat up the edges of the iPhone 8.

This will soften the seal between the screen and the frame.

Note : Heat up a little bit more the top part of the screen to make it easier to remove.

Step 3

Insert an opening pick in the bottom left part of the phone and slide it around the phone.

Repeat that step on the left and right side of the phone.

Step 4

Grab and gently lift the screen.

Gently pull the screen back.

Step 5

Open the screen as you would open a book. Careful not to tear the three cables linked to the logic board.

Step 6

With the cruciform screwdriver, remove the four screws securing the LCD screen bracket.

Step 7

Grab the connectors bracket and remove it

Step 8

With the nylon spudger, disconnect the battery.

Unlock the LCD/Touch screen cable.

Step 9

Keep the nylon spudger and disconnect the Force Touch sensor and home button cable.

Step 10

With a cruciform screwdriver, remove the three screws circled in red securing the front camera/earpiece speaker/proximity sensor cable connectors.

Step 11

Grab that bracket with a pair of tweezers and remove it.  

Step 12

Disconnect the front camera/earpiece speaker/proximity sensor with the nylon spudger.

The screen of your iPhone 8 is now disassembled.

Step 13

Remove the four screws circled in red with the triwing screwdriver.

Those screws secure the home button bracket.

Step 14

Grab the home button bracket and remove it.

Step 15

With the nylon spudger, gently disconnect the home button from its cable.

Be careful during this step, the home button is very fragile.

Step 16

Peel off the home button with the nylon spudger.

Remove it on the front.

Be very careful in order not to damage the home button cable!

Step 17

The home button of the iPhone is now disassembled.

You can replace it with a new one if needed.

To reassemble your iPhone 8 follow this guide in reverse order.

Recommended repair kit

Required spare parts


Add a comment

They're talking about us

SOSav in the press

  • SOSav on tf1
  • SOSav on france 2
  • SOSav on france 3
  • SOSav on m6
  • SOSav on france info
  • SOSav on 01 net
  • SOSav on l express