Spare parts for smartphones, tablets... English USD

Repair guide : Vibrator iPhone 5S

Level : Medium Time : 35 min Author : Alexandre
45 people have done this repair successfully ! Why not you?
This guide is for replacing the vibrator of the iPhone 5S.
Symptoms : phone that does not vibrate anymore, defective vibrator
Some advice before you start
Repair - Repair guide: Vibrator iPhone 5S
Guide format : Pdf Integrate

Step 1

Before disassembling the vibrator of your iPhone 5S, you have to securely turn it off.

Maintain the power button on the top for a few seconds. Then slide to the right to "power off" button in red.

Step 2

Use a pentalobe screw to remove the two pentalobe screws holding the front panel.

Those screws are circled in red on the picture.

Then insert a iSclack to pull the entire front panel as shown on pictures 2,3 and 4.

Step 3

Open the handles of the iSclack, this will pull the front panel to 2 to 3cm.

Do not remove the screen, it is still linked to the home button cable / touch ID among others.

Tips : If the screen is cracked or broken, suggest that you lay clear packing tape over the iPhone's display until the whole front face is covered in order to open is more easily.

A metal bracket covers the home button cable.

With a pair of tweezers, remove it.

Step 4

Use the nylon spudger to disconnect the home button cable.

Step 5

Gently lift the display assembly to a 90° angle as shown on pictures 1 and 2.

Remove the four screws circled in red with a cruciform screwdriver.

Those screws secure the screen connector bracket.

Make sure to remember the spot of each screw. They have different characteristics. You have to put them back into their original spot.

Step 6

Use the pair of tweezers and remove the screen connector bracket.

Step 7

Use the spudger to disconnect :

- The front camera/microphone/earpiece speaker/light and promixity sensor cable

- The LCD screen cable.

Step 8

Still with a nylon spudger, disconnect the Touch screen cable.

Then grab the display assembly and remove it.

The complete display is now disassembled on the iPhone 5S.

Step 9

With a cruciform screwdriver, remove the two screws circled in red.

Those screws maintain the metal vibrator bracket.

Remove it with a pair of tweezers.

Step 10

With a cruciform screwdriver, remove the screws circled in red.

This screw maintains the vibrator.

Remove it with a pair of tweezers.

Step 11

The vibrator of your iPhone 5S is now disassembled.

You can replace it by a new one.

To reassemble your iPhone 5S follow this guide in reverse order.

Comments

Add a comment

They're talking about us

SOSav in the press

  • SOSav on tf1
  • SOSav on france 2
  • SOSav on france 3
  • SOSav on m6
  • SOSav on france info
  • SOSav on 01 net
  • SOSav on l express