Repair guide : Speaker (bottom one) iPhone 5C

To open your iPhone 5C, put the iSclack or a suction cup on the front panel.

With the iSclack : Put the iPhone in between the plastic suction cups. Close the handle, it will pull the front panel up from the rear.

With a suction cup : Put a suction cup above the home button. Then gently pull to lift the front panel of the iPhone 5C.

Make sure the suction cup is completely on the screen.

You can now open the display assembly vertically.

Remove the 4 screws circled in red holding the cables to the logic board.

With a pair of tweezers, remove the panel assembly cable bracket from your iPhone 5C.

With a nylon spudger, disconnect the 3 connectors on the screen :

The third one, is the LCD Retina cable.

You iPhone 5C's display assembly is now disassembled.

Remove the two cruciform screws circled in red that maintain the metal battery connector bracket .

You can now remove the battery bracket.

With a nylon spudger, gently pry up on the battery connector to disconnect the logic board.

With the iSesamo or a nylon spudger, insert it on the top to pull out the battery.

With a nylon spudger, gently pry on the antenna connector to disconnect the logic board.

With a nylon spudger, gently pull the cable as shows on the pictures..

Remove the three cruciform screws circled in red that maintain the speaker to the rear panel.

With a pair of tweezers, remove the metal bracket holding the speaker of the iPhone 5C .

With a nylon spudger, gently pry on the iPhone's rear panel to remove the speaker.

The speaker of your iPhone 5C is now disassembled. You can replace it by a new one.