Spare parts for smartphones, tablets... English USD

Repair guide : LCD Shield Plate iPhone 5

Level : Medium Time : 20 min Author : Louis O.
60 people have done this repair successfully ! Why not you?
Located behind the LCD screen, this metal shield plate protects the LCD screen on your iPhone 5. It is disassembled when replacing the display assembly.
Some advice before you start
Repair - Repair guide: LCD Shield Plate iPhone 5
Guide format : Pdf Integrate

Step 1

Before replacing the LCD shield plate of your iPhone 5, you have to securely turn it off.

Maintain the power button on the top for a few seconds.

Then slide to the right to "power off" button in red.

Step 2

Remove the two screws circled in red with a pentalobe screwdriver as shown on the picture. 

They are located at the bottom of the iPhone around the dock connector (lightning).

 

Step 3

Place the suction cup on the iPhone 5.

The suction cup has to be as close to the home button as possible (circular bottom button)

If you want it to stick correctly, the suction cup needs to be on the whole screen.

For better results, we recommend that you use the ventouse premium.

Step 4

Make sure the suction secures the screen of your iPhone 5.

Pull the suction cup strongly enough to create a space between the front panel and the rest of the screen.

Gently insert a nylon spudger inside that space and pry up.

The screen of your iPhone 5 is still attached to the rear panel. To unclip it, slide the nylon spudger on the left side and then the right side.

Step 5

Once unclipped, lift the screen and hold it vertically as shown on the picture.

Attention : Don't try removing the screen just yet ! It is still attached to the iPhone 5 by a few connectors.

Step 6

Remove the three cruciform screws holding the front panel assembly cable bracket to the iPhone 5 logic board :

two 1.2mm cruciform screws circled in red,

one 1.6mm cruciform screw circled in yellow.

ATTENTION : this last screw is not magnetic, so it will not stay attached to the magnetized screwdriver. Do not loose it.

Step 7

With a pair of tweezers, remove the screen connectors and back camera bracket.

Step 8

With the nylon spudger gently pry to disconnect the connector linked to the camera assembly and proximity sensor.

Step 9

Still with the nylon spudger, disconnect the connector linked to the touch screen.

Step 10

The disconnect the LCD connector.

Step 11

You can now remove the front panel assembly of your iPhone 5.

Step 12

Remove the two cruciform screws holding the earpiece spearker bracket :

a 4.1mm cruciform screw circled in red,

a 2.2mm cruciform screw circled in yellow.

Step 13

With the nylon spudger, gently pry to lift the earpieace speaker bracket.

Then remove it with a pair of tweezers.

Step 14

Then grab the earpiece speaker on your iPhone 5.

Step 15

Remove the 2 cruciform screws circled in red holding the LCD shield plate.

Step 16

With a cruciform screwdriver, remove the 2 screws on each side of the LCD frame.

Step 17

Now pry to remove the shield place from the LCD screen.

Step 18

The LCD shield plate of your iPhone 5 is now disassembled.

You can replace it by a new one.

To reassemble your iPhone 5 follow this guide in reverse order.

Comments

Add a comment

They're talking about us

SOSav in the press

  • SOSav on tf1
  • SOSav on france 2
  • SOSav on france 3
  • SOSav on m6
  • SOSav on france info
  • SOSav on 01 net
  • SOSav on l express