Before you start disassembling the back cover of your Nintendo 2DS, it is necessary for obvious security reasons, to make sure that the console is off.
If this is not the case, press the ignition button for a few seconds and then switch off the console.
Using a Phillips screwdriver, unscrew the two screws circled in red to hold the console battery cover.
Then remove the battery cover.
Use the nylon spatula to gently lift the console battery.
To do this, insert the spatula in the gap located on the lower part of the battery then lever to extract it.
Then remove the battery.
The battery of your Nintendo 2DS is now disassembled.
Repeat the Phillips screwdriver to unscrew the 10 screws circled in red to hold the back shell on the console.
Then grasp the back shell and lift it very gently without removing it.
A tablecloth connects the back shell to the rest of the console! Be careful not to force it out.
Remove the back shell of the console on the right side.
Using the nylon spatula, unlock the connector on the connecting wire of the rear cameras.
Then gently pull on the connecting web of the rear cameras and then remove the back shell.
The back cover of your Nintendo 2DS is now disassembled.
Replace it with a new one if necessary.
To reassemble your Nintendo 2DS follow this guide in reverse order.
Add a comment